The 3652 series supports microwave and millimeter-wave testing with selectable 17–34 GHz, 37–43 GHz, 46–53 GHz and 1–110 GHz conversion configurations. Input/output bands and connectors depend on model. LAN remote control and custom multichannel, multi-IF and instantaneous-bandwidth configurations are supported. Select a specific model below; maximum frequency and bandwidth figures must not be combined across models.
3652 series reference; interfaces and configuration depend on selected model.
Models, frequencies and interfaces
| Model | Input frequency range | Output frequency range | Input interface | Output interface |
|---|
| 3652-17G-34G-UC1 | 70 MHz ±20 MHz / 1.2 GHz ±0.5 GHz / 2.25 GHz ±0.25 GHz / 4 GHz ±1 GHz | 17–34 GHz | SMA (F) | 2.92 mm (F) |
|---|
| 3652-17G-34G-DC1 | 17–34 GHz | 70 MHz ±20 MHz / 1.2 GHz ±0.5 GHz / 2.25 GHz ±0.25 GHz / 4 GHz ±1 GHz | 2.92 mm (F) | SMA (F) |
|---|
| 3652-37G-43G-DC1 | 37–43 GHz | 70 MHz ±20 MHz / 1.7 GHz ±1.1 GHz / 2.25 GHz ±1 GHz | 2.4 mm (F) | SMA (F) |
|---|
| 3652-46G-53G-UC1 | 70 MHz ±20 MHz / 1.7 GHz ±1.1 GHz / 2.25 GHz ±1 GHz | 46–53 GHz | SMA (F) | 1.85 mm (F) |
|---|
| 3652P | 1–110 GHz | 1.2 GHz ±0.5 GHz | 1.0 mm (F) | SMA (F) |
|---|
Levels, gain and noise
| Model | Input level | Adjustable gain | Gain step | Noise figure at maximum gain |
|---|
| 3652-17G-34G-UC1 | −70 to +10 dBm | 0–45 dB | 0.5 dB | ≤18 dB |
|---|
| 3652-17G-34G-DC1 | −70 to +10 dBm | 0–45 dB | 0.5 dB | ≤12 dB |
|---|
| 3652-37G-43G-DC1 | −80 to +10 dBm | 0–40 dB | 0.5 dB | ≤18 dB |
|---|
| 3652-46G-53G-UC1 | −80 to +10 dBm | 0–40 dB | 0.5 dB | ≤18 dB |
|---|
| 3652P | −60 to −30 dBm | 10–40 dB | 0.1 dB | ≤20 dB |
|---|
In-band performance
| Model | In-band amplitude response | Group-delay ripple | Image rejection | In-band spurious |
|---|
| 3652-17G-34G-UC1 | ≤±0.4 dB @ ±20 MHz / ≤±1 dB @ ±0.25 GHz / ≤±1.5 dB @ ±0.5 GHz / ≤±2 dB @ ±1 GHz | linear ≤0.03 ns/MHz; parabolic ≤0.01 ns/MHz² | >60 dBc | <−55 dBc (0 dBm output) |
|---|
| 3652-17G-34G-DC1 | ≤±0.4 dB @ ±20 MHz / ≤±1 dB @ ±0.25 GHz / ≤±1.5 dB @ ±0.5 GHz / ≤±2 dB @ ±1 GHz | linear ≤0.03 ns/MHz; parabolic ≤0.01 ns/MHz² | >60 dBc | <−55 dBc (0 dBm output) |
|---|
| 3652-37G-43G-DC1 | ≤±0.4 dB @ ±20 MHz / ≤±2.2 dB @ ±1 GHz / ≤±2.5 dB @ ±1.1 GHz | linear ≤0.03 ns/MHz; parabolic ≤0.01 ns/MHz² | >60 dBc | <−55 dBc (0 dBm output) |
|---|
| 3652-46G-53G-UC1 | ≤±0.4 dB @ ±20 MHz / ≤±2.2 dB @ ±1 GHz / ≤±2.5 dB @ ±1.1 GHz | ≤6 ns / 100 MHz | — | <−55 dBc (0 dBm output) |
|---|
| 3652P | ≤±2.5 dB / 1 GHz | 1 ns (any 40 MHz band); 2 ns (any 250 MHz band) | ≥70 dB (1–50 GHz); ≥60 dB (50–110 GHz) | ≤−50 dBc (maximum gain, 0 dBm output; IF output harmonics excluded) |
|---|
Phase noise
| Model | Phase noise (dBc/Hz; @ indicates offset) |
|---|
| 3652-17G-34G-UC1 | <−75 dBc/Hz @ 100 Hz; <−90 @ 1 kHz; <−95 @ 10 kHz; <−95 @ 100 kHz; <−100 @ 1 MHz |
|---|
| 3652-17G-34G-DC1 | <−75 dBc/Hz @ 100 Hz; <−90 @ 1 kHz; <−95 @ 10 kHz; <−95 @ 100 kHz; <−100 @ 1 MHz |
|---|
| 3652-37G-43G-DC1 | <−75 dBc/Hz @ 100 Hz; <−90 @ 1 kHz; <−95 @ 10 kHz; <−95 @ 100 kHz; <−100 @ 1 MHz |
|---|
| 3652-46G-53G-UC1 | <−65 dBc/Hz @ 100 Hz; <−85 @ 1 kHz; <−90 @ 10 kHz; <−90 @ 100 kHz; <−95 @ 1 MHz |
|---|
| 3652P | 1–50 GHz: ≤−85 dBc/Hz @ 1 kHz, ≤−95 @ 10 kHz, ≤−100 @ 100 kHz; 50–110 GHz: ≤−80 @ 1 kHz, ≤−90 @ 10 kHz, ≤−95 @ 100 kHz |
|---|
Common specifications
| Parameter | Specification |
|---|
| Minimum frequency step | 1 Hz |
|---|
| Output P−1dB | ≥10 dBm |
|---|
| Output third-order intercept | ≥20 dBm |
|---|
| Gain accuracy | ±1.0 dB |
|---|
| Frequency stability | ±1×10⁻⁸/day; ±1×10⁻⁷/year |
|---|
| Remote control | LAN |
|---|
| Maximum non-damaging input power (catalog rating) | ≥10 dBm |
|---|
| 3652P maximum instantaneous bandwidth | 1 GHz |
|---|
Supply and selection
- F means female. Slash-separated IF ranges are selectable configurations, not all simultaneous channels.
- Phase-noise entries without repeated units retain dBc/Hz. The 3652P ratings are separated into 1–50 GHz and 50–110 GHz bands.
- Amplitude, group-delay and image-rejection ratings apply to the specified band and configuration. A dash means no value is stated in the catalog.
- The non-damaging input rating is not a recommended operating level. Set signals within the selected model input-level range and confirm overload limits for the actual interface.
- Enclosure, connector layout and accessories depend on the selected configuration.
Specify input/output frequencies, instantaneous bandwidth, channels, gain, connectors and control requirements. Catalog standard items are a power cord, user manual, product conformity certificate and aluminum case. Model, customization, accessories and delivery are defined in the quotation.
Request a quote
